Return to site

Jump Desktop 7 1 2 – Remote Desktop Utility System

broken image


  1. Jump Desktop 7 1 2 – Remote Desktop Utility System Software
  2. Jump Desktop 7 1 2 – Remote Desktop Utility System Components
-->

Remote Desktop is great for connecting to a Windows computer from another part of the network. You can get access to local drives, printers, files, etc. As if you were sitting in front of it.While. Jump Desktop 7.0.3 – Remote desktop utility. February 15, 2017. Enjoy the freedom to work from anywhere. Jump Desktop is a remote desktop application that lets you.

http://iwwuqy.xtgem.com/Blog/__xtblog_entry/19154026-triage-1-0-14-mg#xt_blog. The following table includes the list of supported RDP file settings that you can use with the Remote Desktop clients. Dead age (2018). Cash slot machine. Free falling game. When configuring settings, check Client comparisons to see which redirections each client supports.

The table also highlights which settings are supported as custom properties with Windows Virtual Desktop. You can refer to this documentation detailing how to use PowerShell to customize RDP properties for Windows Virtual Desktop host pools.

Connection information

RDP settingDescriptionValuesDefault valueWindows Virtual Desktop support
full address:s:valuePC Name:
This setting specifies the name or IP address of the remote computer that you want to connect to.
This is the only required setting in an RDP file.
A valid name, IPv4 address, or IPv6 address.No
alternate full address:s:valueSpecifies an alternate name or IP address of the remote computer.A valid name, IPv4 address, or IPv6 address.No
username:s:valueSpecifies the name of the user account that will be used to sign in to the remote computer.Any valid username.No
domain:s:valueSpecifies the name of the domain in which the user account that will be used to sign in to the remote computer is located.A valid domain name, such as 'CONTOSO'.No
gatewayhostname:s:valueSpecifies the RD Gateway host name.A valid name, IPv4 address, or IPv6 address.No
gatewaycredentialssource:i:valueSpecifies the RD Gateway authentication method.- 0: Ask for password (NTLM)
- 1: Use smart card
- 2: Use the credentials for the currently logged on user.
- 3: Prompt the user for their credentials and use basic authentication
- 4: Allow user to select later
- 5: Use cookie-based authentication
0No
gatewayprofileusagemethod:i:valueSpecifies whether to use default RD Gateway settings.- 0: Use the default profile mode, as specified by the administrator
- 1: Use explicit settings, as specified by the user
0No
gatewayusagemethod:i:valueSpecifies when to use an RD Gateway for the connection.- 0: Don't use an RD Gateway
- 1: Always use an RD Gateway
- 2: Use an RD Gateway if a direct connection cannot be made to the RD Session Host
- 3: Use the default RD Gateway settings
- 4: Don't use an RD Gateway, bypass gateway for local addresses
Setting this property value to 0 or 4 are effectively equivalent, but setting this property to 4 enables the option to bypass local addresses.
0No
promptcredentialonce:i:valueDetermines whether a user's credentials are saved and used for both the RD Gateway and the remote computer.- 0: Remote session will not use the same credentials
- 1: Remote session will use the same credentials
1No
authentication level:i:valueDefines the server authentication level settings.- 0: If server authentication fails, connect to the computer without warning (Connect and don't warn me)
- 1: If server authentication fails, don't establish a connection (Don't connect)
- 2: If server authentication fails, show a warning and allow me to connect or refuse the connection (Warn me)
- 3: No authentication requirement specified.
3No
enablecredsspsupport:i:valueDetermines whether the client will use the Credential Security Support Provider (CredSSP) for authentication if it is available.- 0: RDP will not use CredSSP, even if the operating system supports CredSSP
- 1: RDP will use CredSSP if the operating system supports CredSSP
1Yes
disableconnectionsharing:i:valueDetermines whether the client reconnects to any existing disconnected session or initiate a new connection when a new connection is launched.- 0: Reconnect to any existing session
- 1: Initiate new connection
0Yes
alternate shell:s:valueSpecifies a program to be started automatically in the remote session as the shell instead of explorer.Valid path to an executable file, such as 'C:ProgramFilesOfficeword.exe'Yes

Session behavior

RDP settingDescriptionValuesDefault valueWindows Virtual Desktop support
autoreconnection enabled:i:valueDetermines whether the client will automatically try to reconnect to the remote computer if the connection is dropped, such as when there's a network connectivity interruption.- 0: Client does not automatically try to reconnect
- 1: Client automatically tries to reconnect
1Yes
bandwidthautodetect:i:valueDetermines whether automatic network type detection is enabled- 0: Disable automatic network type detection
- 1: Enable automatic network type detection
1Yes
networkautodetect:i:valueDetermines whether or not to use automatic network bandwidth detection. Requires bandwidthautodetect to be set to 1.- 0: Don't use automatic network bandwidth detection
- 1: Use automatic network bandwidth detection
1Yes
compression:i:valueDetermines whether bulk compression is enabled when it is transmitted by RDP to the local computer.- 0: Disable RDP bulk compression
- 1: Enable RDP bulk compression
1Yes
videoplaybackmode:i:valueDetermines if the connection will use RDP-efficient multimedia streaming for video playback.- 0: Don't use RDP efficient multimedia streaming for video playback
- 1: Use RDP-efficient multimedia streaming for video playback when possible
1Yes

Device redirection

RDP settingDescriptionValuesDefault valueWindows Virtual Desktop support
audiocapturemode:i:valueMicrophone redirection:
Indicates whether audio input redirection is enabled.
- 0: Disable audio capture from the local device
- 1: Enable audio capture from the local device and redirection to an audio application in the remote session
0Yes
encode redirected video capture:i:valueEnables or disables encoding of redirected video.- 0: Disable encoding of redirected video
- 1: Enable encoding of redirected video
1Yes
redirected video capture encoding quality:i:valueControls the quality of encoded video.- 0: High compression video. Quality may suffer when there is a lot of motion.
- 1: Medium compression.
- 2: Low compression video with high picture quality.
0Yes
audiomode:i:valueAudio output location:
Determines whether the local or remote machine plays audio.
- 0: Play sounds on the local computer (Play on this computer)
- 1: Play sounds on the remote computer (Play on remote computer)
- 2: Do not play sounds (Do not play)
0Yes
camerastoredirect:s:valueCamera redirection:
Configures which cameras to redirect. This setting uses a semicolon-delimited list of KSCATEGORY_VIDEO_CAMERA interfaces of cameras enabled for redirection.
- * : Redirect all cameras
- List of cameras, such as camerastoredirect:s:?usb#vid_0bda&pid_58b0&mi
- One can exclude a specific camera by prepending the symbolic link string with '-'
Don't redirect any camerasYes
devicestoredirect:s:valuePlug and play device redirection:
Determines which devices on the local computer will be redirected and available in the remote session.
- *: Redirect all supported devices, including ones that are connected later
- Valid hardware ID for one or more devices
- DynamicDevices: Redirect all supported devices that are connected later
Don't redirect any devicesYes
drivestoredirect:s:valueDrive/storage redirection:
Determines which disk drives on the local computer will be redirected and available in the remote session.
- No value specified: don't redirect any drives
- * : Redirect all disk drives, including drives that are connected later
- DynamicDrives: redirect any drives that are connected later
- The drive and labels for one or more drives, such as 'drivestoredirect:s:C:;E:;': redirect the specified drive(s)
Don't redirect any drivesYes
keyboardhook:i:valueDetermines when Windows key combinations (WIN key, ALT+TAB) are applied to the remote session for desktop connections.- 0: Windows key combinations are applied on the local computer
- 1: Windows key combinations are applied on the remote computer when in focus
- 2: Windows key combinations are applied on the remote computer in full screen mode only
2Yes
redirectclipboard:i:valueClipboard redirection:
Determines whether clipboard redirection is enabled.
- 0: Clipboard on local computer isn't available in remote session
- 1: Clipboard on local computer is available in remote session
1Yes
redirectcomports:i:valueCOM ports redirection:
Determines whether COM (serial) ports on the local computer will be redirected and available in the remote session.
- 0: COM ports on the local computer are not available in the remote session
- 1: COM ports on the local computer are available in the remote session
0Yes
redirectprinters:i:valuePrinter redirection:
Determines whether printers configured on the local computer will be redirected and available in the remote session
- 0: The printers on the local computer are not available in the remote session
- 1: The printers on the local computer are available in the remote session
1Yes
redirectsmartcards:i:valueSmart card redirection:
Determines whether smart card devices on the local computer will be redirected and available in the remote session.
- 0: The smart card device on the local computer is not available in the remote session
- 1: The smart card device on the local computer is available in the remote session
1Yes
usbdevicestoredirect:s:valueUSB redirection- *: Redirect all USB devices that are not already redirected by another high-level redirection
- {Device Setup Class GUID}: Redirect all devices that are members of the specified device setup class
- USBInstanceID: Redirect a specific USB device identified by the instance ID
Don't redirect any USB devicesYes

Display settings

RDP settingDescriptionValuesDefault valueWindows Virtual Desktop support
use multimon:i:valueDetermines whether the remote session will use one or multiple displays from the local computer.- 0: Don't enable multiple display support
- 1: Enable multiple display support
1Yes
selectedmonitors:s:valueSpecifies which local displays to use from the remote session. The selected displays must be contiguous. Requires use multimon to be set to 1.
Only available on the Windows Inbox (MSTSC) and Windows Desktop (MSRDC) clients.
Coma separated list of machine-specific display IDs. IDs can be retrieved by calling mstsc.exe /l. The first ID listed will be set as the primary display in the session.All displaysYes
maximizetocurrentdisplays:i:valueDetermines which display the remote session goes full screen on when maximizing. Requires use multimon to be set to 1.
Only available on the Windows Desktop (MSRDC) client.
- 0: Session goes full screen on the displays initially selected when maximizing
- 1: Session dynamically goes full screen on the displays touched by the session window when maximizing
0Yes
singlemoninwindowedmode:i:valueDetermines whether a multi display remote session automatically switches to single display when exiting full screen. Requires use multimon to be set to 1.
Only available on the Windows Desktop (MSRDC) client.
- 0: Session retains all displays when exiting full screen
- 1: Session switches to single display when exiting full screen
0Yes
screen mode id:i:valueDetermines whether the remote session window appears full screen when you launch the connection.- 1: The remote session will appear in a window
- 2: The remote session will appear full screen
2Yes
smart sizing:i:valueDetermines whether or not the local computer scales the content of the remote session to fit the window size.- 0: The local window content won't scale when resized
- 1: The local window content will scale when resized
0Yes
dynamic resolution:i:valueDetermines whether the resolution of the remote session is automatically updated when the local window is resized.- 0: Session resolution remains static for the duration of the session
- 1: Session resolution updates as the local window resizes
1Yes
desktop size id:i:valueSpecifies the dimensions of the remote session desktop from a set of pre-defined options. This setting is overridden if desktopheight and desktopwidth are specified.-0: 640×480
- 1: 800×600
- 2: 1024×768
- 3: 1280×1024
- 4: 1600×1200
1Yes
desktopheight:i:valueSpecifies the resolution height (in pixels) of the remote session.Numerical value between 200 and 8192Match the local computerYes
desktopwidth:i:valueSpecifies the resolution width (in pixels) of the remote session.Numerical value between 200 and 8192Match the local computerYes
desktopscalefactor:i:valueSpecifies the scale factor of the remote session to make the content appear larger.Numerical value from the following list: 100, 125, 150, 175, 200, 250, 300, 400, 500100Yes

RemoteApp

RDP settingDescriptionValuesDefault valueWindows Virtual Desktop support
remoteapplicationcmdline:s:valueOptional command-line parameters for the RemoteApp.Valid command-line parameters.No
remoteapplicationexpandcmdline:i:valueDetermines whether environment variables contained in the RemoteApp command-line parameter should be expanded locally or remotely.- 0: Environment variables should be expanded to the values of the local computer
- 1: Environment variables should be expanded to the values of the remote computer
1No
remoteapplicationexpandworkingdir:i:valueDetermines whether environment variables contained in the RemoteApp working directory parameter should be expanded locally or remotely.- 0: Environment variables should be expanded to the values of the local computer
- 1: Environment variables should be expanded to the values of the remote computer.
The RemoteApp working directory is specified through the shell working directory parameter.
1No
remoteapplicationfile:s:valueSpecifies a file to be opened on the remote computer by the RemoteApp.
For local files to be opened, you must also enable drive redirection for the source drive.
Valid file path.No
remoteapplicationicon:s:valueSpecifies the icon file to be displayed in the client UI while launching a RemoteApp. If no file name is specified, the client will use the standard Remote Desktop icon. Only '.ico' files are supported.Valid file path.No
remoteapplicationmode:i:valueDetermines whether a connection is launched as a RemoteApp session.- 0: Don't launch a RemoteApp session
- 1: Launch a RemoteApp session
1No
remoteapplicationname:s:valueSpecifies the name of the RemoteApp in the client interface while starting the RemoteApp.App display name. For example, 'Excel 2016.'No
remoteapplicationprogram:s:valueSpecifies the alias or executable name of the RemoteApp.Valid alias or name. For example, 'EXCEL.'No
Remote Desktop PassView v1.02 - Recover the password of Remote Desktop Connection utility
Copyright (c) 2006 - 2014 Nir Sofer
Jump desktop 7 1 2 – remote desktop utility system software

Description

Remote Desktop PassView is a small utility that reveals the password stored by Microsoft Remote Desktop Connection utility inside the .rdp files.

Notice: Currently, this tool doesn't work with the latest versions of Remote Desktop Connection utility.You can use the following tools to get the passwords stored by new versions of Remote Desktop Connection (6.0 or higher):
Network Password Recovery
CredentialsFileView One chat 2 1 download free.

Versions History

  • Version 1.02 - Removed the command-line options that export the passwords to a file from the official version. A version of this tool with full command-line support will be posted on separated Web page.
  • Version 1.01 - The configuration is now saved to a file instead of the Registry.
  • Version 1.00 - First release.

License

This utility is released as freeware. You are allowed to freely distribute this utility via floppy disk, CD-ROM, Internet, or in any other way, as long as you don't charge anything for this. If you distribute this utility, you must include all files inthe distribution package, without any modification !
Be aware that selling this utility as a part of a software package is not allowed !

Disclaimer

The software is provided 'AS IS' without any warranty, either expressed or implied,including, but not limited to, the implied warranties of merchantability and fitnessfor a particular purpose. The author will not be liable for any special, incidental,consequential or indirect damages due to loss of data or any other reason.

Using Remote Desktop PassView

Remote Desktop PassView doesn't require any installation process or additional DLL files.Just copy the executable (rdpv.exe) to any folder you like, and run it.After you run rdpv.exe, the main window display the passwords of .rdp located under your'My Documents' folder. The default .rdp file (Default.rdp) is usually stored in this location
If you want to recover that password of another .rdp file, just drag the file from Explorer intothe window of Remote Desktop PassView utility or use the 'Open .rdp File' option from the File menu.
Be aware that Remote Desktop PassView can only recover the passwords created by your current logged on user. It cannot recover the passwords of .rdp files created by other users.

Translating Remote Desktop PassView To Another Language

Remote Desktop PassView allows you to easily translate all menus, dialog-boxes, and other stringsto other languages.
In order to do that, follow the instructions below:
  1. Run Remote Desktop PassView with /savelangfile parameter:
    rdpv.exe /savelangfile
    A file named rdpv_lng.ini will be created in the folder of Remote Desktop PassView utility.
  2. Open the created language file in Notepad or in any other text editor.
  3. Translate all menus, dialog-boxes, and string entries to the desired language.
  4. After you finish the translation, Run Remote Desktop PassView, and all translated strings will be loaded from the language file.
    If you want to run Remote Desktop PassView without the translation, simply rename the language file, or move it to another folder.
Jump Desktop 7 1 2 – Remote Desktop Utility System

Description

Remote Desktop PassView is a small utility that reveals the password stored by Microsoft Remote Desktop Connection utility inside the .rdp files.

Notice: Currently, this tool doesn't work with the latest versions of Remote Desktop Connection utility.You can use the following tools to get the passwords stored by new versions of Remote Desktop Connection (6.0 or higher):
Network Password Recovery
CredentialsFileView One chat 2 1 download free.

Versions History

  • Version 1.02 - Removed the command-line options that export the passwords to a file from the official version. A version of this tool with full command-line support will be posted on separated Web page.
  • Version 1.01 - The configuration is now saved to a file instead of the Registry.
  • Version 1.00 - First release.

License

This utility is released as freeware. You are allowed to freely distribute this utility via floppy disk, CD-ROM, Internet, or in any other way, as long as you don't charge anything for this. If you distribute this utility, you must include all files inthe distribution package, without any modification !
Be aware that selling this utility as a part of a software package is not allowed !

Disclaimer

The software is provided 'AS IS' without any warranty, either expressed or implied,including, but not limited to, the implied warranties of merchantability and fitnessfor a particular purpose. The author will not be liable for any special, incidental,consequential or indirect damages due to loss of data or any other reason.

Using Remote Desktop PassView

Remote Desktop PassView doesn't require any installation process or additional DLL files.Just copy the executable (rdpv.exe) to any folder you like, and run it.After you run rdpv.exe, the main window display the passwords of .rdp located under your'My Documents' folder. The default .rdp file (Default.rdp) is usually stored in this location
If you want to recover that password of another .rdp file, just drag the file from Explorer intothe window of Remote Desktop PassView utility or use the 'Open .rdp File' option from the File menu.
Be aware that Remote Desktop PassView can only recover the passwords created by your current logged on user. It cannot recover the passwords of .rdp files created by other users.

Translating Remote Desktop PassView To Another Language

Remote Desktop PassView allows you to easily translate all menus, dialog-boxes, and other stringsto other languages.
In order to do that, follow the instructions below:
  1. Run Remote Desktop PassView with /savelangfile parameter:
    rdpv.exe /savelangfile
    A file named rdpv_lng.ini will be created in the folder of Remote Desktop PassView utility.
  2. Open the created language file in Notepad or in any other text editor.
  3. Translate all menus, dialog-boxes, and string entries to the desired language.
  4. After you finish the translation, Run Remote Desktop PassView, and all translated strings will be loaded from the language file.
    If you want to run Remote Desktop PassView without the translation, simply rename the language file, or move it to another folder.

Feedback

If you have any problem, suggestion, comment, or you found a bug in my utility, you can send a message to nirsofer@yahoo.com
Download Remote Desktop PassView

Jump Desktop 7 1 2 – Remote Desktop Utility System Software

Remote Desktop PassView is also available in other languages. In order to change the language of Remote Desktop PassView, download the appropriate language zip file, extract the 'rdpv_lng.ini', and put it in the same folder that you Installed Remote Desktop PassView utility.

Jump Desktop 7 1 2 – Remote Desktop Utility System Components

LanguageTranslated ByDateVersion
ArabicAbo Rehaam11/02/20111.01
BulgarianHristo Drumev13/01/2007
DutchJan Verheijen23/02/20151.02
FrenchPasswordOne21/02/2015
GalicianXosé Antón Vicente rodríguez13/01/2007
German«Latino» auf WinTotal.de18/09/20141.02
Hebrewpeterg29/04/2011
HungarianZityiSoft20/06/2009
ItalianFabio Mastroianni13/01/2007
ItalianMaurizio Madaro12/01/2007
Persian( JAVAD JOURSARAEI Alashti )06/08/2014
PersianAmirreza Nasiri13/11/20151.02
RomanianJaff (Oprea Nicolae)05/02/20161.02
RussianSonya10/03/2010
Simplified ChineseRindz30/11/20131.04
SlovakFrantišek Fico09/02/20171.02
SpanishSpyn - Toño21/04/2009
Spanisharquer.net20/05/2009
TaiwaneseRepublic of Taiwan06/01/2007
Traditional Chinese繁體中文23/03/2007
TurkishKitap Özetleri30/01/2009
TurkishEFromm11/02/2009




broken image